Description
Why should I protect my 1/2 UNF or 1/2 UNEF barrel thread ?
Often a firearm or an airgun has a thread at the end of its barrel. So it is essential to protect it when accessories are not mounted on with a barrel thread protector. Thus you prevent shocks that may occur during transport or use. In this way the barrel thread remains usable for a long time, concentric and with no play. But if some gun manufacturers provide barrel thread protectors out of the factory, some others don’t.
By the way, the barrel thread protector provided by the gun manufacturer can be poor quality, made of low-end material or simply lost. It is then important to replace it quickly, so as not to leave the precious thread vulnerable.
We strongly advise against leaving a silencer mounted on a weapon, at the risk that the air that stagnates in it generates condensation (and therefore corrosion). Users of sound moderators must actually free up their thread at end of each session, then it is important to protect it. This is where our 1/2 UNF or 1/2 UNEF barrel thread protector comes into play.
For what barrel thread is this barrel thread protector made ?
This barrel thread protector is intended for all barrels with threaded end in 1/2 UNF or 1/2 UNEF. Make your choice from the drop down menu before placing your order.
The 1/2 UNF thread is considered to be standard in Europe for. 22 LR weapons. But you can also find it on many airguns, or even on large caliber rifles. Sometimes we meet the 1/2 UNF thread under the name 1/2×20 TPI, a different designation for same thread.
The 1/2 UNEF thread is considered as standard in the USA for. 22 caliber weapons in general. This includes .22 LR rifles, but also assault rifles in. 223 Remington (AR15 and others). It is also sometimes referred to as 1/2×28 TPI, again the two names mean the same thing.
Be careful, if your .22 LR rifle is a European weapon, threaded in Europe (say a CZ 455 For example, or a Anschütz 1416) then there is a very good chance that it will be in 1/2 UNF. On the other hand, if it is an American gun threaded serial (like a Ruger American Rimfire or a Mossberg Plinkster for example), then it will more likely be in 1/2 UNEF (1/2×28 TPI).
Other than firearms and airguns, this barrel thread protector can also be suitable to protect the output threads of our adapters. It covers 10 mm of thread.
Beware, the internal diameter at the front of this thread protector is only 8.2 mm (.322″). It will not be suitable for weapons of a bigger caliber (9×19 for example).
How can I recognize a good barrel thread protector ?
First, it comes from a serious manufacturer like www.suppressor-thread-adapter.com. We make ours very carefully out of strong and durable material. It is an XC38 steel (also known as C35), which we machine on high-precision CNC machines. It is an XC38 steel (also known as C35), which we machine on high-precision CNC machines.
Our barrel thread protectors are then blued for optimal corrosion resistance. The black shade produced will also match your barrel. Their knurling enables easy screwing/unscrewing without tools. However, the precision of the internal thread provides a perfect fit with no play.
The spare part that makes the difference, to use your silencer or your muzzle brake with the same efficiency throughout the life of the weapon.
Lucio. (verified owner) –
Top level!!!
Didier H. (verified owner) –
Bien, très bien même.
Gilles D (verified owner) –
Parfaitement adapté au filetage. Excellent rapport Qualité /Prix.
DIMITRIS (verified owner) –
very good quality item
CHRISTIAN M. (verified owner) –
De bonne qualité usinage parfait je recommande ce produit .Maison sérieuse livraison rapide.
Nicolas B. (verified owner) –
Parfait!
Anonymous (verified owner) –
Excellent
IOANNIS T (verified owner) –
Works and looks great on the adapter.
Dylan (verified owner) –
Une bague de très bonne qualité, très bien finie, envoi rapide et très bien emballée.
Je recommande !
Richard R. (verified owner) –
Usinage et traitement de finition au top … se monte parfaitement
Anonymous (verified owner) –
very nice very well made
Anonyme (verified owner) –
Bon produit
Philippe G (verified owner) –
Bien
Paul-Antoine M (verified owner) –
Parfait
Eric K. (verified owner) –
Bague de protection très bien réalisée je recommande le produit. Un plus serait de proposer les bagues aux mêmes diamètres extérieurs que les adaptateurs pour le coté esthétique, mais je pense que cela doit être possible en sur mesure.
J’ai vraiment été content de découvrir vos produits de qualité très difficiles à trouver autrement.
d. didier (verified owner) –
tres bien corforme
Adrien (verified owner) –
Excellent produit
Eric (verified owner) –
Très belle réalisation mais dommage pour le diamètre extérieur un peu petit par rapport aux adaptateurs de silencieux
Alister (verified owner) –
Very well made, pity the outside didn’t match the adapter. I use these guys as often as I can. Recommend them to all AAA+
Nicolas M. (verified owner) –
Parfait , filtage très fin et précis
Fabrice (verified owner) –
Top
patrick q. (verified owner) –
parfait .
Jonathan E. (verified owner) –
Parfait
MORENO M. (verified owner) –
Articolo ben realizzato.
Jacques (verified owner) –
Bonne protection
Jean-luc D. (verified owner) –
Bague de finition indispensable pour protéger le filetage. Très bon ajustage.
THIERRY M. (verified owner) –
Parfait pour protéger l’adaptateur de mon Walther PPK/S
Eric B. (verified owner) –
rapport qualité prix intéressant , très satisfais .
Paul-Antoine M. (verified owner) –
Super bien
REYNALD B. (verified owner) –
Niquel
Sébastien (verified owner) –
Très bonne qualité et livraison rapide merci
Anonyme (verified owner) –
Suffisamment long pour masquer le canon 22LR :nickel
didier l. (verified owner) –
Entièrement satisfait.
Jean M. (verified owner) –
Idem que ci dessus !
FABRICE L. (verified owner) –
Parfait
David C. (verified owner) –
Impeccable.
Kevin H. (verified owner) –
J’en avais besoin pour un Walther CP88 qui avait le filetage sans protection. Parfait !
Manuel B. (verified owner) –
Pieza muy bien hecha y robusta , encaja a la perfección en el adaptador
didier G (verified owner) –
Conforme à mes attentes
Laurent L. (verified owner) –
Indispensable pour protéger le filetage, même si dans ce cas l’adaptateur est remplaçable, contrairement à un canon directement fileté. Je l’aurais toutefois préféré du même diamètre que l’adaptateur pour l’esthétique quand le réducteur de son n’est pas monté (même s’il serait probablement plus cher dans ce cas).
John B. (verified owner) –
fits great
Anonyme (verified owner) –
Oroduit conforme à l’offre et à mon besoin – service commercial et livraison parfait
Nicolas M. (verified owner) –
Usinage de qualité
Laurent M. (verified owner) –
Qualité parfaite
philippe l. (verified owner) –
très content de ma commande
Anonyme (verified owner) –
Parfait
Anonyme (verified owner) –
Permet de protéger le filetage très utile
Anonymous (verified owner) –
Exactly what i need
Yan D. (verified owner) –
Ras
Frederic R. (verified owner) –
Excellent , rapport qualité prix , exactement le même modèle pour le SIGP322 . Merci